Why is an inspection of lighters required before shipment?

Lighters are flammable and dangerous goods, so pre-shipment inspection is essential. We need to check whether the goods meet overseas safety regulations, and find defects like gas leakage, unreliable ignition, cracked casings and failed safety locks. These faults may lead to fire or explosion during sea transport and cause serious shipping accidents. Besides, many foreign ports set strict access rules for lighters. Non-compliant cargo will be detained or returned directly, bringing high demurrage charges and fines. Checking at factory in advance helps sort out defective units, reduce complaints and claims after shipment, and maintain good business trust with overseas buyers.
Inspection Standards
1. Document verification: Check test reports, dangerous goods declaration papers and export certificates. Confirm model, batch and marking match the purchase order.
2. Visual inspection: No cracks, deformation, sharp burrs or obvious color difference on the shell. Printing should be clear without peeling, stain or scratch.
3. Child safety lock test: For lighters fitted with safety lock, ignition cannot be triggered when locked. Unlock action should be smooth and the lock works reliably.
4. Ignition test: Carry out repeated ignition tests. The flame should light steadily. No misfire, flash fire or continuous long flame. Flame height shall meet specification.
5. Air tightness test: Do water immersion or static leak check. No air bubbles from valve and joint parts.
6. Fuel check: Confirm fuel type complies with order and destination country rules. Fuel filling volume is within limit, no overfilling.
7. Packaging check: Individual pack and outer carton are intact. Hazard warning labels are properly attached. No extra flammable items mixed inside cartons.
8. Sampling & judgement: Follow agreed AQL standard. Critical safety defects are not acceptable. Reject the batch if defect rate exceeds the limit.




