Why should Insulated Cups be inspected before shipment?

Pre-shipment inspection for vacuum flasks is essential.
It helps verify the heat retention performance, so defective items with poor insulation won't reach buyers. We check for leaks, cracks and dents on the body, and confirm lids, seals and straws are in good condition. We also verify materials and markings to meet food-contact safety rules of destination countries. Returning or reworking goods overseas costs a lot. Inspection at factory before shipment controls quality, reduces customs risks and protects business trust.
Inspection Standards
1. Sampling: Follow AQL standard agreed by both sides. Randomly pick goods from finished batches for inspection.
2. Document check: Verify packing list, product specification, warning labels and test reports for food contact materials.
3. Visual appearance: Check the flask body for scratches, dents, paint peeling, deformation and uneven printing. Check lids and accessories for burrs or cracks.
4. Dimension check: Measure height, diameter and capacity, make sure they match the order requirements.
5. Leakage test: Tighten the lid properly, fill with water, flip the flask upside down for several minutes. No water leakage is allowed.
6. Heat retention test: Pour hot water of specified temperature into the cup, seal it well. After the required holding time, measure the water temperature to confirm insulation meets the requirement.
7. Assembly & function test: Open and close the lid repeatedly. Check if the silicone seal fits tightly, the pop-up switch works smoothly without jamming.
8. Material check: Confirm inner liner and seals are food-grade, no strange smell.
9. Packing check: Check individual box and outer carton. Ensure printing, barcodes and shipping marks are correct. Cartons should be firm without damage.
10. Result judgment: If defect quantity exceeds the acceptable limit, the whole batch will be rejected.




